Is Your Furnace Winter-Ready?

A Connors Plumbing, Heating, Air, & Electrical technician removes a furnace panel to access and replace the air filter inside.

Is Your Furnace Winter-Ready? A Southern Minnesota Checklist

A southern Minnesota winter asks more of your furnace than almost any other piece of equipment in your home. During a subzero stretch in Waseca or Mankato, it can run nearly nonstop for days. A small issue that barely shows up in October, like a slow condensate drain or a frosted vent pipe, is the kind of thing that turns into a no-heat call in January. Making sure your furnace is winter-ready now gives you time to fix those issues on your schedule.

Most of the problems that stop furnaces in extreme cold are predictable. They involve water, venting, fuel supply, and airflow, and nearly all of them can be checked before the first real cold snap.

Connors Plumbing, Heating & Air serves homeowners from our offices in Waseca and Mankato. Here’s what fails first in a Minnesota winter, what a professional tune-up covers, and what to keep on hand before temperatures drop.

How Can You Tell If Your Furnace Is Winter-Ready?

A winter-ready furnace starts every time, reaches your thermostat setting without running constantly on mild days, drains condensate freely, vents through clear pipes, and has been inspected within the past year. In southern Minnesota, it also needs a reliable fuel supply and a plan for the coldest nights.

These are the cold-weather trouble spots our technicians see most often.

  • Can My Furnace Condensate Line Freeze? Yes. High-efficiency furnaces produce water as they run, and a small line or pump carries it to a drain. If that line passes through an unheated space or exits outdoors, it can freeze solid. Water then backs up, and a safety switch shuts the furnace down until the line is cleared.
  • What Happens When Snow or Frost Blocks My Furnace Vents? Most high-efficiency furnaces vent through white PVC pipes on the side of the house. Drifting snow or heavy frost in subzero weather can block those pipes, and the furnace will shut itself off to protect your home. Check the pipes after every storm and during long cold stretches.
  • Is My Propane Supply Ready for Winter? If your home heats with propane, check the tank level before winter and schedule delivery early, before roads get rough. Keep a clear path to the tank. If a tank runs completely dry, the system typically needs a leak check before it can be safely relit.
  • Why Does My Furnace Run Constantly When It’s Below Zero? Long run times are normal on the coldest days. If your furnace can’t reach the thermostat setting on milder days, or runs nonstop when it’s only moderately cold, that points to a dirty filter, an airflow problem, or a part that’s starting to fail.
  • Why Is My House So Dry in Winter? Cold outdoor air holds little moisture, and heating it makes indoor air feel even drier. A whole-home humidifier connected to your furnace adds moisture back. If you already have one, its water panel should be replaced each fall so it keeps working through the season.

What Does a Furnace Tune-Up Include?

A furnace tune-up is a full inspection, cleaning, and safety test of your heating system before the heavy-use season. During the visit, your Connors technician will work through each of the following.

  1. Inspect the Burners and Ignition: Your technician will clean the burners and test the ignitor and flame sensor so the furnace lights reliably on the first try.
  2. Test the Safety Controls: Pressure switches, limit switches, and rollout switches will each be tested to confirm they shut the furnace down when something goes wrong.
  3. Check the Heat Exchanger: The heat exchanger will be inspected for cracks or corrosion, since it keeps combustion gases separate from the air in your home.
  4. Clear the Condensate Drain: On high-efficiency furnaces, the condensate trap, line, and pump will be cleaned and tested so water drains freely all winter.
  5. Inspect the Venting: Your technician will check the flue or PVC vent pipes, along with the outdoor terminations, for blockages, loose joints, and proper slope.
  6. Measure Gas or Propane Pressure: Correct fuel pressure helps your furnace burn cleanly and produce the heat it’s rated for.
  7. Check the Blower and Electrical Connections: The blower motor, wheel, capacitor, and wiring will be inspected, and any loose connections will be tightened.

When Should You Schedule Furnace Maintenance in Minnesota?

Schedule furnace maintenance in early fall, before overnight lows settle below freezing. If your furnace hasn’t been checked yet this year, schedule a tune-up now, before the first subzero stretch puts it under full load.

Members of our Service Partner Plan receive an Annual High-Performance Systems Check, priority service, and no overtime charges. The plan is also transferable if you sell your home. Check our offers page for current savings on heating service.

What Should You Keep on Hand Before a Cold Snap?

A little preparation before the coldest weather arrives makes any furnace problem easier to handle.

  1. Spare furnace filters in the correct size
  2. Fresh thermostat batteries if your model uses them
  3. A clear path to your furnace, vent pipes, and propane tank
  4. Working carbon monoxide alarms on every level of your home
  5. A safe backup heat plan such as a space heater plugged directly into a wall outlet and kept clear of bedding and curtains
  6. The location of your furnace switch and gas or propane shutoff
  7. Our phone number saved where everyone in the house can find it

If anything seems off before the cold arrives, a quick call now is far easier than a repair during a subzero night.

Head Into Winter With a Furnace You Can Count On

Southern Minnesota winters are long, and your furnace carries most of the load. A tune-up this fall and a few simple checks will help it start cleanly and keep running when you need it most.

Connors technicians are clean, courteous, and trained across plumbing, heating, cooling, and electrical work, with flexible financing available. Call (507) 690-3580 or book online to schedule your furnace tune-up.

We proudly serve Waseca, Mankato, North Mankato, Owatonna, St. Peter, Janesville, Eagle Lake, Madison Lake, New Richland, Waterville, Elysian, and communities throughout southern Minnesota.

Contact Us Today!

Checkboxes

Schedule Now

Checkboxes
Americans with Disabilities Act (ADA) Notice

At Connors Plumbing, Heating and Air, we are committed to ensuring that individuals with disabilities enjoy full access to our websites. In recognition of this commitment, we are in the process of making modifications to increase the accessibility and usability of this website, using the relevant portions of the Web Content Accessibility Guidelines 2.0 (WCAG 2.0) as our standard. Please be aware that our efforts are ongoing. If at any time you have difficulty using this website or with a particular web page or function on this site, please contact us by phone at (507) 690-3580; or email us at (service@callconnors.com) and place “Web Content Accessibility (ADA)” in the subject heading and we will make all reasonable efforts to assist you.